Want something tidier than just zip ties but don't want to fork out money for cable guides? read on...
What you will need:
1. Zip Ties
2. Plastic hose (clear stuff from plastic box or hardware store, arond 5-6mm depending on your zip tie width)
Cut off a short length of hose, maybe 5mm or more depending on how far out you want / need the cable to stick out. Thread your zip tie through the hose like so:
Wrap the zip tie around your cable and slip the end back through the hose:
Do your zip tie up around whatever part of the bike you want, in this case the arch of my forks:
Picture of back side of arch:
Trim off the excess tail of the zip tie and voila!
